Occupational Safety & Health Administration (OSHA) Training

As affiliated faculty of Mountain West OSHA Training Institute we are proud to offer the following courses:

OSHA 511 Occupational Safety and Health Standards for General Industry

This course covers OSHA Standards, policies, and procedures in general industry. Topics include scope and application of the OSHA General Industry Standards, general industry principles and special emphasis on those areas in general industry which are most hazardous.

OSHA 521 – OSHA Guide to Industrial Hygiene

This course covers industrial hygiene practices and related OSHA regulations and procedures.

OSHA 2015 - Hazardous Materials

This course covers OSHA General Industry Standards and other consensus and proprietary standards that relate to the use of hazardous materials.

OSHA 2045 - Machinery and Machine Guarding Standards

This course covers the various types of common machinery, machine safeguards, and related OSHA regulations and procedures.

OSHA 2055 - Cranes in Construction

This course covers the requirements for operation of cranes in the construction industry using the OSHA construction Cranes and Derricks Standard as a guide.

OSHA 2225 - Respiratory Protection

This course covers the requirements for the establishment, maintenance, and monitoring of a respiratory protection program.

OSHA 2255 - Principles of Ergonomics (Formerly OSHA 2250)

This course covers the use of ergonomic principles to recognize, evaluate, and control workplace conditions that cause or contribute to musculoskeletal and nerve disorders.

OSHA 2264 - Permit-Required Confined Space Entry

This course covers the safety and health hazards associated with permit-required confined space entry.

OSHA 3015 - Excavation, Trenching and Soil Mechanics (Formerly OSHA 3010)

This course covers the OSHA Excavation Standard and safety and health aspects of excavation and trenching.

OSHA 3085 - Principles of Scaffolding

This course covers the requirements for construction and the safe construction and use of scaffolding using the OSHA construction scaffold standard as a guide.

OSHA 3095 - Electrical Standards

This course covers OSHA Electrical Standards and the hazards associated with electrical installations and equipment.

OSHA 3115 - Fall Protection (Formerly OSHA 3110 Fall Arrest Systems)

This course covers the OSHA Fall Protection Standard for construction and an overview of fall protection methods.

OSHA 5810 - Hazards Recognition and Standards for On-Shore Oil and Gas Exploration and Production

This course covers OSHA Construction and General Industry Standards relating to the oil and gas industry.

OSHA 7100 - Introduction to Machinery and Machine Safeguarding

This course covers the process to identify, select and properly safeguard machinery to protect employees and others in the work area and deliver appropriate training in safe work practices.

OSHA 7105 - Evacuation and Emergency Planning

This course covers OSHA requirements for emergency action and fire protection plans.

OSHA 7115 - Lockout/Tagout

This course covers the role and responsibility of the employer to develop and implement an energy control program, or lock-out/tag-out (LOTO) for the protection of workers while performing servicing and maintenance activities on machinery and equipment.

OSHA 7120 - Introduction to Combustible Dust Hazards

This course covers the hazards posed by combustible dust within general industry.

OSHA 7200 - Bloodborne Pathogens Exposure Control for Healthcare Facilities

This course covers the development and implementation of Exposure Control Plans (ECP) for healthcare facilities.

OSHA 7205 - Health Hazard Awareness

This course covers common health hazards that are encountered in the workplace.

OSHA 7300 - Understanding OSHA’s Permit-Required Confined Space Standard

This course covers the requirements of the OSHA Permit-Required Confined Space Standard.

OSHA 7400 - Noise Hazards in the Construction Industry

This course covers the evaluation and reduction of noise hazards in the construction industry.

OSHA 7405 - Fall Hazard Awareness for the Construction Industry

This course covers the identification, evaluation, prevention and control of fall hazards in the construction industry.

OSHA 7410 - Managing Excavation Hazards

This course covers the roles and responsibilities of the employer to educate and assign a competent person to excavation sites.

OSHA 7415 - OSHA Construction Industry Requirements (Major Hazards and Prevention)

This course provides federal and public sector employees with pertinent information regarding OSHA requirements and guidelines applicable to construction industry activities and operations.

OSHA 7500 - Introduction to Safety and Health Management

This introductory course addresses the four core elements of an effective safety and health program with strategies & techniques that are critical to each element’s proper management.

OSHA 7505 - Introduction to Incident (Accident) Investigation

This course covers an introduction to basic accident investigation procedures and describes accident analysis techniques.

OSHA 7510 - Introduction to OSHA for Small Businesses

This course covers an introduction to the Occupational Safety and Health Administration (OSHA) and the OSH Act for owners and managers of small businesses.

OSHA 7845 - Recordkeeping Rule Seminar

This course covers OSHA requirements for maintaining and posting records of occupational injuries and illnesses, and reporting specific cases to OSHA.

Other general safety & health training we are proud to offer:

The 40-hour course is specifically designed for workers who are involved in clean-up operations, voluntary clean-up operations, emergency response operations, and storage, disposal, or treatment of hazardous substances or uncontrolled hazardous waste sites. HAZWOPER 40 Hour is required for employees working on a project consisting of Uncontrolled Hazardous Waste Operation mandated by the Government.

The 24-hour course covers broad issues pertaining to the hazard recognition at work sites. HAZWOPER 24 Hour is required for employees visiting an Uncontrolled Hazardous Waste Operation mandated by the Government.

The 8-hour refresher course meets the requirements outlined in OSHA 29 CFR 1910.120 for 8 (eight) hours of annual refresher training for workers at hazardous waste sites. This course is designed for general site workers who remove hazardous waste or who are exposed or potentially exposed to hazardous substances or health hazards.

OSHA requires that employees be trained on lockout policies and procedures. Training is done to ensure that the purpose and function of the energy control program are understood by employees and that the knowledge and skills required for the safe application, usage, and removal of the energy controls are acquired by employees.

OSHA’s Hazard Communication Standard, also known as HAZCOM is a federal regulation (29 CFR 1910.1200) that specifies that when hazardous chemicals are present in the workplace employees have a right to know about the risks involved with storing and handling such substances. The Hazard Communication Standard is now aligned with the Globally Harmonized System of Classification and Labeling of Chemicals (GHS) which is a worldwide standard.

OSHA requires employers to train and fit test employees that use respiratory protection at work. This required annual training provides an opportunity to explain the importance of respiratory protection and offer a refresher course on the proper use, limitations, and care of their personal protection equipment.

If fire extinguishers are available for employee use, it is the employer’s responsibility to educate employees on the principles and practices of using a fire extinguisher and the hazards associated with fighting small or developing fires. [29 CFR 1910.157(g)(1)] This education must be provided annually and when a new employee is first hired. [29 CFR 1910.157(g)(2)]

Employees who have been designated to use fire extinguishers as part of the emergency action plan, must be trained on how to use the fire extinguishers appropriately in the workplace. [29 CFR 1910.157(g)(3)] This training is a specialized form of education that focuses on developing or improving skills and it must be provided annually and when employees are first assigned these duties. [29 CFR 1910.157(g)(4)]

This course is designed to protect those working around or entering confined spaces. You will learn the physical, chemical, and biological characteristics about working in and around confined spaces. Course objectives include:

Understand the scope & application of OSHA’s confined space entry standards.

Identify and differentiate between “Confined Spaces” and “Permit Required” confined spaces.

Understand OSHA requirements for a “Permit-Required Confined Space Entry Program”.

Know the responsibilities of entrants, attendants, and entry supervisors.

Utilizing “Alternate Entry” and “Reclassification” procedures.

Understand the requirements and limitations for “Rescue & Emergency Services”.

Understand proper air monitoring methods and equipment.

Mine Safety & Health Administration (MSHA) Training

This course presents an overview of the requirements for the initial training of new surface miners at underground mines. These MSHA requirements can be found in Title 30 Code of Federal Regulations (CFR) Part 48, Subpart B. The course covers some basic mining regulations for surface mining, as well as the recognition and avoidance of hazards at surface mines, emergency response procedures, and miners’ rights and responsibilities.

The course is a comprehensive safety program designed for anyone involved in general industry. Specifically devised for safety directors and field supervisors, the program provides complete information on OSHA compliance issues.

Taking Safety

To New Heights

Need a little help ensuring your safety and health program is what you need to be safe and successful? Call us anytime. We truly enjoy helping you safely achieve your goals!